Man började med bara 8 kanaler i radion, nu ändrar man bara i menyn “MLT2” så har man 12+2 kanaler.
Känner fortfarande inget behov av att byta radio utan är klart nöjd med min Futaba
Compatible with 14ch (12 linear CH/2 digitalCH).(All model types)
When “MLT2” is selected at FASST setting of the frequency setting screen, the 12 linear CH output mode is activated.
In the MLT2 mode, 9-12CH setting is now possible on the function/sub-trim/servo reverse/fail safe/end point/trainer screens.
*Virtual channels cannot be used in the MLT2 mode.
*When you want to use 12CH in the trainer system.
Set the frequency setting to "MLT2" and the trainer-12/8CH-setting to "12CH".
The trainer system doesn't work if this setting is not suitable for the instructor side and student side.
*When 12/8CH of the trainer setting is "8CH", the trainer output becomes 8ch. Even if the frequency setting is "MLT2".
At “MLT2” setting, 2AIL+4FLP and 4AIL+2FLP can be selected at wing type. (Airplane/Glider)
*When wing type is set to 2AIL+4FLP or 4AIL+2FLP for an airplane (all tail types) or glider (ailevator type), the frequency cannot be changed to frequencies other than MLT2 because the number of channels is insufficient